	Questions about Fiberman's Standard Fiberglass Grating Call 1-877-984-7788
STANDARD FIBERGLASS GRATING
Pultruded Products Molded Grating Structural Products Railing & Ladders Tanks & Piping Safety Spray Shields
Request Quote About Us Design Tools

fiberman > pultruded frp products > pultruded fiberglass grating > standard fiberglass grating

TOLL FREE

1-877-984-7788

ASK FOR FIBERMAN

Southwell Corp.
Products that Last.

DURADEK® Standard Fiberglass Grating

Standard FRP Grating is kept in stock and ships quickly.

DURADEK® Standard Fiberglass Grating

DURAGRID® Custom Fiberglass Grating

DURAGRID® Heavy Duty Fiberglass Grating

DURAGRID® Phenolic FRP Grating - Fire Rated

DURADEK® Standard Fiberglass Grating

DURADEK® is a standard pultruded fiberglass grating which is kept in stock and available for quicker shipping. It is available with individual bearing bars in either 1" or 1-1/2" "I" shapes or a 2" "T" shape. DURADEK® uses a polyester or vinyl ester resin and is flame retardant. The bearing bars use both longitudinal (glass roving) and multidirectional (glass mat) reinforcements as well as a synthetic surfacing veil to provide unequaled corrosion resistance.

How To Order

how to order frp grating

When ordering DURADEK® or DURAGRID®, make sure the bearing bars in the panel are oriented in the correct direction for the application. Bearing bars should traverse from support to support. Cross-rods are not intended to be applied in the span direction. The adjacent drawing will help you specify the width and length of panels. NOTE: Width is the measurement from end to end of the cross-rods. Length is always the bearing bar length.

Load Tables

Typical Bearing Bar Spacing

Fiberman can supply virtually any non-standard and non- stocked custom grid and grating. However, the following load tables are for the most popular bearing bar configurations. The physical properties are shown for the section.
To determine loading or physical properties for other bar spacings, use the multiplier shown on the tables.

Load Data

Deflection and safe load data were calculated by the Strongwell Test Lab. All tables show typical values.

Series Designation

The series designation indicates the bar size and shape and the percent of open area. For example: T-1800 1" means 1" T-bar spaced to give an 18% open area.

Cross Rod Spacings

Cross rod spacings must be 2", 4", 6", 8", 10", etc. Our standard spacings are 6" and 12" on center.

Load Table Values

All tables show typical values.

frp grating load table duradek I-6000 1"

frp grating load table - Duradek I-6000 1.5"

frp grating load table - Duradek T-5000 2"